NALCO 73385 is an aggressive but effective solution for persistent biological issues. It is most effective when used as part of a managed chemical program where dosage is monitored to prevent system corrosion while maintaining microbial control.
No (molybdate is not listed as a marine pollutant under MARPOL Annex III, but some countries require notification).
: Typically non-flammable in its liquid state but can release toxic oxides of carbon ( COxcap C cap O sub x ) and phosphorus ( POxcap P cap O sub x ) if involved in a fire.
The NALCO 73385 MSDS provides essential information on the safe handling, use, storage, and disposal of this chemical product. While some information is proprietary or not disclosed, the report highlights the product's potential hazards, including skin and eye corrosion, respiratory tract irritation, and environmental concerns. It is crucial for users to follow the recommended safety precautions, handling and storage guidelines, and disposal regulations to minimize risks associated with NALCO 73385.
While Nalco 73385 is generally aqueous (water-based) and not highly flammable, the SDS outlines safety measures for fire scenarios where the chemical might be present. nalco 73385 msds
: Must be disposed of as hazardous waste according to local, state, and federal regulations.
) indicates that NALCO 73385 is . Below is a synthesized overview of standard hazards, protective measures, and first aid guidance typical of Nalco's industrial water biocide portfolio: Hazard Identification Classification: Highly Alkaline Liquid / Corrosive.
Contact a licensed hazardous waste transporter. Nalco 73385 may qualify as RCRA hazardous waste code D002 (Corrosive - pH <2 or >12.5) . Some states also list molybdenum as a toxic metal.
Its efficacy at elevated pH and persistent nature make it an ideal choice for closed water loops. NALCO 73385 is an aggressive but effective solution
Store the chemical in its original, tightly closed container in a cool, dry, well-ventilated area away from direct sunlight.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The water and chelating agents are generally low toxicity, but the concentrated molybdate solution is alkaline (pH between 11.5 and 13.0), which drives the corrosive classification.
Here are some key points from the Nalco 73385 MSDS: : Typically non-flammable in its liquid state but
By understanding the composition, uses, potential hazards, and safe handling procedures for Nalco 73385, you can ensure the effective and responsible use of this corrosion inhibitor in industrial water treatment applications.
Stop leaks if safe; use inert absorbent material (sand or earth) to soak up the liquid.
Wash immediately with soap and water; remove contaminated clothing.
Without the SDS, workers may unknowingly mix incompatible chemicals (e.g., oxidizers with Nalco 73385), leading to exothermic reactions, toxic gas release, or equipment damage.
. This broad-spectrum, non-oxidizing chemical agent is primarily engineered for the control of microbial growth in complex water systems. This paper outlines its primary applications, physical properties, and the essential safety protocols detailed in its Material Safety Data Sheet (MSDS). Product Overview and Application NALCO 73385 is specifically designed for use in recirculating cooling towers closed-loop systems