Anytone At-5555n Ii Service Menu Here

To look at the AM modulation envelope and check for audio flat-topping or distortion. Conclusion

: Aligns the S-meter to read exactly S9 when a standard -73 dBm signal is injected into the antenna jack.

Hook the radio up to a calibrated frequency counter, key the mic on AM/FM, and adjust the value until the counter reads the exact center frequency. 2. Power Output Settings (PWR / TX)

Note: Your stock values may vary. Write them down before changing anything!

The Anytone AT-5555N II is a popular amateur radio transceiver that offers a range of features and functionalities. To access advanced settings and configuration options, users can enter the service menu. anytone at-5555n ii service menu

Operational Analysis and Technical Procedures: Accessing and Interpreting the Service Menu of the AnyTone AT-5555N II

The Anytone AT-5555N II is a popular and highly-regarded ham radio transceiver that offers a wide range of features and capabilities. However, to truly unlock its full potential, you need to access the service menu. In this article, we'll provide a comprehensive guide on how to access and navigate the Anytone AT-5555N II service menu, as well as explore the various settings and options available.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

The screen will now show or a calibration parameter (e.g., rEF or PLL ). Use the CH/UP/DN knob or channel selector to scroll through parameters. To look at the AM modulation envelope and

These correspond to the fine-tuning voltages for different modes, controlling the varicap capacitors to adjust frequency accuracy. loC / LO: Controls the local oscillator offset. How to Fine-Tune Calibration

To help tailor this information to your specific project, tell me:

Are you writing this article for a , an amateur radio forum , or an e-commerce site ?

Always let your radio sit powered on for at least 15 to 20 minutes before making service menu adjustments. Internal components shift characteristics slightly as they reach operating temperature. The Anytone AT-5555N II is a popular amateur

Press and hold the FUNC (Function) key and the PUSH (Channel selector knob) simultaneously.

: With the radio off, press and hold both the MENU and MODE buttons simultaneously while turning the power on.

What Tom checked (and what he avoided)