Open a web browser and enter the default IP address in the address bar: . Log in using the default credentials: Username: admin Password: admin (or leave blank if it's a new device). 4. Upgrade the Firmware
Press and hold it with a paperclip for 10 seconds while the device is powered on.
Firmware updates patch bugs that cause the repeater to drop connections or require random reboots.
If your device supports configuration file backup (as many Pix-Link models do), save a backup before proceeding. This allows easy restoration if settings are lost. Pix-link 300m Firmware Update
To update the firmware on your Pix-link 300M device (such as models
: For safety, connect your computer directly to the repeater using an Ethernet cable during the update to prevent a "bricked" device if the Wi-Fi signal drops . Step-by-Step Update Guide
Pix-Link WiFi Repeater Setup, Login, Reset & Firmware Update Open a web browser and enter the default
: If you cannot access the config page, try clearing your browser cache or disabling any active VPNs/proxies. Factory Reset : If the update causes instability, hold the physical
Type the default IP address into the URL bar. For most Pix-Link devices, this is or 192.168.10.1 . (Check the back sticker of the device to confirm). Press Enter. Step 3: Log In to the System
D: Test matrix (power-fail scenarios vs update phases) Upgrade the Firmware Press and hold it with
Turn your device over and look for the and Hardware Version . Visit the Pix-link Official Download Center. Search for "300M" or your specific model (e.g., LV-WR09).
He labeled the bottom of the Pix-Link: “Firmware v2.1.4 – Flashed 2025-02-17 – Do not update unless critical.”