In professional workflows, you need forms of verification. If either fails, you get red "X" marks, audio dropouts, or the complete inability to route audio.
Open the control panel, choose your network interface, select your channel count, and click Start .
DVS cannot act as the Preferred Master (Clock Leader) for a Dante network with hardware devices. Ensure that a hardware device (like a digital console or stage box) is selected as the Preferred Master in Dante Controller. DVS must always follow a hardware clock. Step 4: Measuring DPC Latency (Windows Only)
The objectives of this verification process were to: dante virtual soundcard dvs verified
In professional audio engineering, saying a system or component is "DVS Verified" means it has been rigorously tested and confirmed to meet Audinate’s performance metrics. Because DVS relies entirely on the host computer’s CPU and network interface card (NIC) to process audio packets, small configuration errors can cause clock synchronization failures, audio dropouts, or artifacts.
The test procedure consisted of the following steps:
Digital audio networking has transformed live sound, broadcast, and studio recording. Audinate's Dante protocol sits at the center of this revolution. While hardware solutions like PCIe cards provide maximum performance, software-based alternatives offer unmatched convenience. In professional workflows, you need forms of verification
Up to 64x64 bidirectional audio channels at 44.1/48 kHz.
To ensure DVS is verified on the network:
For users exploring their options, several alternatives exist. is a popular free option for Windows, offering complex internal audio routing. JACK Audio Connection Kit is a powerful, open-source alternative for low-latency audio routing on Linux, Windows, and macOS. For dedicated Dante hardware, the RME Digiface Dante is a professional USB 3.0 interface providing extremely stable, low-latency performance with added physical I/O. DVS cannot act as the Preferred Master (Clock
Connect your laptop to a digital console (like a Yamaha CL/QL or Allen & Heath dLive) and record up to 64 tracks directly into your DAW (Pro Tools, Logic, Nuendo) without extra hardware. Virtual Soundcheck:
Dante Virtual Soundcard is a software application from Audinate that turns your Windows or macOS computer into a Dante-enabled device. It allows your DAW (Digital Audio Workstation), media player, or Skype call to send and receive up to 64x64 channels of uncompressed, low-latency audio over a standard Ethernet network.
To verify your network's clock stability, always ensure that a (e.g., a digital console, stage box, or a Dante AVIO adapter) is designated as the Preferred Leader in Dante Controller. DVS should remain a follower. If DVS is forced to lead the clock, software jitter will eventually introduce synchronization drift. Managing Latency Settings
Navigate to the in Dante Controller and click on your DVS device. Monitor the Latency tab. You want to see a clean histogram where peak latencies stay well below the threshold line. If the green bars push into the red zone, increase the latency setting in the DVS control panel. Clock Synchronization
The network compatibility of DVS was verified by connecting it to various Dante-enabled devices from different manufacturers. The test involved configuring the devices to communicate with each other over the Dante network, ensuring seamless audio transmission between devices. The results showed that DVS was compatible with all tested devices, demonstrating its ability to integrate into existing Dante networks.