Xterra Xt900 Treadmill Manual -

Excessive friction between belt and deck. Unplug, check lubrication levels, and verify the motor wires are secure. Incline Motor Error

If the belt shifts to one side or slips when you step on it, adjust the rear roller bolts using your Allen wrench.

Time, Speed, Distance, Incline, Calories, and Heart Rate. xterra xt900 treadmill manual

Estimates total calories burned (based on standard user weight data).

If the treadmill suddenly stops during a workout, the manual instructs you to check the (located on the front motor cover near the power cord). Press the red button to reset. Excessive friction between belt and deck

Be careful not to pinch the main data cable running inside the right upright.

If you have been ignoring your manual, take 20 minutes today to read through the maintenance section. Check your belt tension, vacuum the motor area, and perform a lubrication cycle. Your knees and your wallet will thank you. Time, Speed, Distance, Incline, Calories, and Heart Rate

A: The belt and deck come pre-lubricated from the factory. After that, you should lubricate every 90 to 180 hours of use, or at least every 3-6 months. Always use an Xterra-approved silicone lubricant.

Always clip the safety tether key to your clothing before starting the belt. The machine will not run without the safety key in place.

Lubricate the walking deck every 90 days (or after 150 miles) with a 100% silicone lubricant. This reduces friction and stress on the motor.

Do you need for specific components like the belt or console?