Leaving the default password active on your InteliLite AMF 25 controller poses a significant security risk. The controller is the brain of your generator system, and unauthorized access could lead to:
Q: How do I change the default password? A: Log in to the device, navigate to the or "User Management" menu, select "Change Password" , and follow the on-screen instructions.
However, modifying critical parameters, clearing specific faults, or configuring the system requires navigating its security interface. If you find yourself locked out, finding the right default password or access code depends entirely on which generation of the AMF 25 hardware you are operating. 1. What is the InteliLite AMF 25 Default Password?
If the default password "0" does not grant access, the system security has likely been hardened. intelilite+amf+25+default+password
Press to move to the next digit (if applicable) or to confirm the password. Method 2: Using ComAp LiteEdit PC Software
You can input passwords directly on the controller screen or via a connected PC. Method 1: Using the Controller Front Panel Navigate to the by pressing the Page button. Scroll to the Enter Password screen using the arrow keys.
Allows viewing values and basic operations. No password required. Leaving the default password active on your InteliLite
Typically required for basic setpoint adjustments.
If you set a new password, write it inside the control panel door.
If connecting through software like LiteEdit , configuration access levels may require entering a specific numerical level clearance from the software prompt. InteliLite 4 AMF 25 (Current Generation) InteliLite AMF 25 - ComAp What is the InteliLite AMF 25 Default Password
For newer models or specific configurations using PC software, the following default credentials may also apply: : 0 User PIN : 0000 Username : administrator
Often, OEMs like SDMO, FG Wilson, or Kohler will set their own "standard" passwords for their fleets.
By default, ComAp controllers ship from the factory without restrictive password protection, or they use a standardized tier system.
If you have a brand-new unit or a controller that has never been reconfigured, the factory default password is:
Leaving your generator controller on factory defaults exposes your critical power systems to accidental changes or unauthorized access. Follow these steps to secure your hardware.
