The TEP-220MC features an RJ11 port to trigger cash drawers. Open and click the Device Settings tab. Look for Peripheral Unit Type or Cash Drawer . Set Document Bottom or Document Top to Cash Drawer 1 .
Right-click the installation file and select .
| Problem | Likely Cause | Solution | |---------|--------------|----------| | Printer not detected over USB | Faulty cable or USB port | Try another cable/port. Unplug > restart PC > replug. | | Prints gibberish text | Wrong driver type | Remove Generic driver; install correct E-pos driver. | | Partial print / cuts off | Paper size mismatch | Set paper size to 80x297mm (continuous roll) in driver settings. | | No response via Ethernet | IP address conflict | Ensure printer has static IP within same subnet as PC. | | Cash drawer won’t open | Driver missing drawer command | Use manufacturer driver; check ESC/POS command 0x1B 0x70 0x00 is supported. | | Driver installation fails (Error 0x0000000x) | Windows driver signing | Temporarily disable driver signature enforcement: Advanced startup > Disable driver signature enforcement → install driver. |
: A setup guide with a download link is hosted on YouTube via Brighttech Networks . Windows 10 Installation Steps
Go to Devices and Printers , right-click your printer, and select Printing preferences . Navigate to the Advanced options or Device Settings tab. Look for the Paper Cut drop-down menu and change the setting from Report Cut to Doc Cut or Page Cut , ensuring it only slices the paper when the entire transaction text has fully fed through. E-pos Tep-220mc Thermal Printer Drivers For Windows 10
: If connecting via USB but requiring serial communication, a Gprinter Virtual Serial Port Driver may be necessary. Specifications at a Glance Feature Print Method Direct Thermal Line Printing Print Speed 220 mm/sec to 250 mm/sec Resolution Paper Width 79.5 ± 0.5 mm (Standard 80mm roll) Interfaces USB, Serial (RS-232), and Ethernet Cutter Auto-cutter (Partial or Full cut) Installation Guide for Windows 10
Select USB (If you are configuring a network printer, select Net/LAN, but USB is recommended for initial installation). 5. Configure the Communication Port (Crucial Step)
Title: Deep Review: E-POS TEP-220MC Thermal Printer Drivers for Windows 10
By following this comprehensive guide, you should be able to find, download, and install the correct E-pos Tep-220mc thermal printer drivers for Windows 10 and get your printer up and running in no time. The TEP-220MC features an RJ11 port to trigger cash drawers
Right-click the newly added printer icon (often labeled POS-80 or E-pos TEP-220 ) and select . Navigate to the Ports tab. Check the box for the correct port:
The installation experience is a mixed bag of legacy software clashing with modern OS security.
Locate your deployment media, or acquire the dedicated setup files from verified distributors like Pro Dynamics Technology Driver Downloads .
Supports standard 80mm thermal roll paper (79.5 ±0.5 mm width). Set Document Bottom or Document Top to Cash Drawer 1
: If you see this error, it means the driver installer is not compatible with Windows 10. This is a known issue for this printer. The solution is to run the installer in "Compatibility Mode" for an older version of Windows, like Windows 7 or XP .
Choose the model: or generic 80mm Thermal Printer .
If you cannot find the official driver, several community-driven platforms offer driver versions that are reportedly compatible with Windows 10. Use these third-party download sites with caution, and always scan any downloaded file with an up-to-date antivirus program before running it.