Ensure both sticks match in speed and capacity to enable dual-channel performance. The maximum supported capacity is strictly . Storage Configuration
:
Requires a standard 24-pin ATX power connector and a 4-pin ATX 12V P4 connector. Manual & Drivers
The drive data speed will throttle to a maximum ceiling of 150 MB/s due to interface limitations.
| | Windows XP | Windows Vista/7 | Windows 8/10 | |---|---|---|---| | Chipset (ATI SB600) | Use ATI Catalyst 9.3 | Use ATI Catalyst 9.3 or Windows Update | Use generic Microsoft drivers | | Realtek HD Audio | Realtek R2.31 | Realtek R2.69 | Realtek R2.82+ | | Realtek Gigabit LAN | Realtek 5.802 | Realtek 7.038 | Realtek 10.038 | | ATI Xpress 200 Graphics | Catalyst 10.2 (legacy) | Catalyst 10.2 (legacy) | Not officially supported; use generic VGA or install Windows 7 drivers in compatibility mode | | USB 2.0 / SATA | Included in chipset drivers | Included in chipset drivers | Windows includes generic drivers | rc415t-am motherboard manual
The board supports legacy IDE drives and modern (for its time) SATA I drives. If you are installing an SSD, note that it will be limited to SATA I speeds (150 MB/s), though it will still provide a significant speed boost over a traditional mechanical hard drive. Driver and BIOS Information
The back of the motherboard provides standard connectivity for peripherals: 1 x PS/2 Mouse port (Green) 1 x PS/2 Keyboard port (Purple) 1 x VGA port (for integrated graphics) 1 x Parallel port (LPT) 4 x USB 2.0 ports 1 x RJ-45 Ethernet port
1 x Ultra DMA 133/100/66 connector (supports 2 IDE devices) Audio: Realtek ALC883 6-channel High Definition Audio LAN: Realtek RTL8100C 10/100 Mbps Ethernet 🔌 Motherboard Layout and Connectors
The BIOS on this board is locked down, with no options for overclocking or adjusting memory timings. RAID and AHCI features are also disabled. This is common for OEM boards. Ensure both sticks match in speed and capacity
If you do manage to find the official manual, or if you discover new information about this motherboard, please contribute to the Retroweb Database here to help others in the community.
The RC415T-AM is picky about memory density. For the best results: Use "Low Density" non-ECC unbuffered DDR2 sticks.
Understanding the limitations and capabilities of your hardware prevents component damage during upgrades. Micro-ATX (mATX)
Hard Drive Activity LED (Pin 1 is positive +, Pin 3 is negative -) Manual & Drivers The drive data speed will
Documentation and driver packs for this vintage board are preserved on The Retro Web , which serves as a primary repository for legacy ECS and Acer hardware manuals. ECS RC415T-AM - The Retro Web
LEDs are polarized (positive/negative sides must match), while switches (Power/Reset) are not Acer Community BIOS and Jumper Settings Clear CMOS: To reset BIOS settings, locate the
Located on the right edge of the board. Connects the main power cable from the PSU.