Built-in slots for CF, SD, XD, MS, and TF cards (up to 64GB in some variants).
software. This software is typically provided on a small CD included with the device. Legacy Systems:
The drives will appear in File Explorer or Finder just like a standard USB flash drive. 2. The One-Touch Backup (OTB) Functionality
Absolutely. However, ensure TRIM is supported. The JMicron chipset in most Model 875 units does support TRIM over USB if your OS and driver are updated to Windows 10 version 1709 or newer. all in 1 hdd docking model 875 driver download
What version are you running (e.g., Windows 11, macOS)?
Modern operating systems handle hard drive connectivity natively. When you plug the Model 875 into a computer via USB, the operating system uses generic mass storage drivers to read your SATA or IDE hard drives immediately. When a Driver Download Is Required:
For those who want to use the backup and cloning features, you have a few options to acquire the software: Built-in slots for CF, SD, XD, MS, and
If you are on or an older driver, large drives (over 2TB) require GPT partitioning. The driver for Model 875 must support 64-bit LBA. Update to the generic driver from 2019 or later.
If your goal is simply to transfer files, copy photos, or wipe an old hard drive, skip the driver installation entirely. Just plug the unit in, power it up, and use Windows Disk Management or File Explorer to interact with your data safely without cluttering your system with outdated backup utilities.
The OTB button cannot function without its dedicated companion utility running in the background tray. Ensure the application is active. If you are on Windows 10 or Windows 11, right-click the software shortcut, go to Properties > Compatibility , and set it to run in Compatibility Mode for Windows 7 . 5. Model 875 Specifications Sheet Supported Specifications HDD Compatibility 2.5" / 3.5" SATA I/II/III and 2.5" / 3.5" IDE Card Reader Slots XD, TF, MS, SD, CF, MD USB Interface USB 2.0 (Up to 480 Mbps) / USB 3.0 Variant (Up to 5 Gbps) Max HDD Capacity Typically up to 2TB for IDE / Up to 8TB+ for SATA Power Output 12V / 2A or 3A External Power Supply OS Support Windows XP / Vista / 7 / 8 / 10 / 11, Mac OS, Linux Legacy Systems: The drives will appear in File
Insert a formatted hard drive into the docking station slot. Connect the power adapter to the wall and the dock.
Before running any software installer, turn off the docking station. Insert a functional hard drive into the corresponding SATA or IDE slot. Ensure the power adapter is plugged firmly into a wall outlet, and connect the USB cable to a motherboard port on your PC (prefer rear ports on desktop computers for stable power delivery). Step 2: Running the Installer
If you have landed on this page searching for drivers, you are likely experiencing a "Device Not Recognized" error or a "Driver Issue" in Windows Device Manager. This article will explain everything you need to know—from whether you actually need a driver to where to find safe firmware updates.
You will need to download and install specific drivers or software utilities if you intend to use the following hardware components on the Model 875: