Mikrotik L2tp Server Setup Better Full ●

Click to add a rule for UDP Port 4500 (IPsec NAT-Traversal): Chain : input Protocol : udp Dst. Port : 4500 Action : accept Click OK . Click + to add a rule for UDP Port 1701 (L2TP traffic): Chain : input Protocol : udp Dst. Port : 1701 Action : accept Click OK .

Set to your desired range (e.g., 192.168.89.10-192.168.89.50 ). Click OK . Step 2: Configure the PPP Profile

If you want VPN clients to access the internet through the MikroTik (full tunnel), add a masquerade rule for the VPN pool. mikrotik l2tp server setup full

Administrative access to the router via Winbox or the WebFig interface.

You need a dedicated range of IP addresses to assign to your remote VPN clients. This prevents IP conflicts with your local LAN. Open and navigate to IP > Pool . Click the + (Add) button. Set Name to vpn-pool . Click to add a rule for UDP Port

/interface l2tp-server server set enabled=yes default-profile=l2tp-profile authentication=mschap2 use-ipsec=yes ipsec-secret=SuperSecretKey123! Use code with caution. 5. Step 4: Create VPN User Accounts

If you want split-tunnel only to LAN, omit NAT. Port : 1701 Action : accept Click OK

If you want clients to access the internet through the router (full tunnel), add masquerade rule: