Epson Adjustment Program L3160 Access

Check the boxes next to and Platen pad counter (if available for your specific regional firmware variant).

I can provide specific maintenance steps based on your current setup. Share public link

Step-by-Step Guide: Resetting the Counter with the Epson Adjustment Program epson adjustment program l3160

In the Port selection dropdown, select the specific USB port where your printer is connected (it will typically display your printer model name next to the port number, such as USB001 (L3160 Series) ). Click . Step 3: Navigating to the Waste Ink Counter

Alternating flashing red lights (specifically the ink and paper lights). Check the boxes next to and Platen pad

The program will prompt you to turn off the printer. Turn it off, then click OK .

To use the adjustment program, ensure your printer is connected via (resets are generally not supported over Wi-Fi). Turn it off, then click OK

The most common operational halt users encounter is the "Service Required" error, which signifies that the printer's waste ink pads are full. This comprehensive guide explains the technical reasons behind this error and provides a step-by-step walkthrough on how to safely use the Epson Adjustment Program (also known as the Epson Resetter) to bring your L3160 back to life. Understanding the "Service Required" Error

Used when moving the printer or after a major repair to prime the ink lines.

Beyond resetting the waste ink pad counter, this program serves as a comprehensive maintenance suite for the L3160 model: Waste Ink Pad Counter Reset: Clears the "Service Required" message to resume printing. Print Head Maintenance:

Leave the Port selection on or select the specific USB port labeled with your printer's name. Click OK . Step 3: Navigate to the Maintenance Menu