: Use the Time Zone slider or button to select your local zone (P-Pacific, M-Mountain, C-Central, or E-Eastern). The clock often defaults to Pacific.
Requires 2 AA batteries (not typically included). 2. Getting Started: Power and Initial Setup
915 MHz/433.92MHz (varies by model iteration, generally 433.92MHz for standard SPC373). Power Source: AA Batteries.
The clock automatically begins searching for the Atomic Time signal. A tower icon will flash on the display. 🔘 Button Diagram and Functions
The built-in sensor updates every 30 seconds. sharp atomic clock spc373 user manual
A radio tower icon with waves.
Have you recently with fresh alkaline ones?
Are you struggling to set up or troubleshoot your Sharp Atomic Clock SPC373? Look no further! This post provides an overview of the user manual for the Sharp Atomic Clock SPC373, a popular and highly accurate atomic clock that automatically synchronizes with atomic time signals.
If you are experiencing issues with your Sharp atomic clock, refer to these common fixes. Clock Does Not Receive Atomic Signal : Use the Time Zone slider or button
Press the + or - buttons to adjust the flashing value.
: Press the ALM ON/OFF button in normal time mode to toggle the alarms on or off.
The Sharp Atomic Clock SPC373 is a reliable and feature-rich clock that displays the current time, date, and temperature. Its atomic technology ensures that the time is always accurate, and it can even automatically adjust for daylight saving time.
Are you having trouble with the or alarm settings ? The clock automatically begins searching for the Atomic
The Sharp SPC373 allows you to set two independent alarms (Alarm 1 and Alarm 2). Setting Alarm 1 or Alarm 2
This article is for informational purposes and is not an official Sharp document. Always refer to the original product manual for specific model variations and safety instructions. Sharp is a registered trademark of Sharp Corporation.
Note: The initial signal reception can take up to 24 hours, but often occurs within the first 10-20 minutes, typically at night. 3. Setting the Time Zone and Daylight Saving Time (DST)
The clock defaults to Eastern Standard Time. You must manually select your time zone so the atomic signal displays the correct hour for your location.