Used for securing the frame corners, motherboard tray, and power supply mounts.
: Attach the power/reset buttons to the front panel using four screws. Panel Clips
: Slide this in from the front and secure it with screws; this is where you’ll also attach the four hinges. Rear Panel
Fasten the top panel to both the front and rear structures using the provided 6-32 screws. caselabs sma8 manual
Slide the entire radiator/bracket assembly back into the lower chamber. Secure it using the four corner thumbscrews.
Secure 3.5" drives using rubber anti-vibration grommets and 6-32 shoulder screws. Secure 2.5" SSDs directly to brackets using M3 screws. Dual Power Supply Setup The SMA8 supports dual power supplies in the lower chamber.
Even if you had the original manual, it wouldn't warn you about these three things: Used for securing the frame corners, motherboard tray,
This guide serves as a comprehensive reference manual for assembling, configuring, and optimizing the CaseLabs SMA8. 1. Inventory & Pre-Assembly Preparation
Measure diagonally from corner to corner. Ensure the frame is square before tightening all frame screws completely. Step 3: Inserting the Mid-Plate Slide the mid-plate horizontally into the chassis channels.
Use the generous 1.5-inch clearance behind the motherboard tray to bundle fan cables, RGB controllers, and pump wiring. Secure them using zip-ties or Velcro straps along the integrated tie-down points. 6. Maintenance and Care Rear Panel Fasten the top panel to both
However, because CaseLabs is defunct, finding an official "SMA8 manual" is a digital scavenger hunt. The original website is gone, and customer support is non-existent. This article serves as your comprehensive —covering assembly, part identification, radiator compatibility, and where to find the original PDF documentation.
Keep the lower chamber organized; ensure excess PSU cables do not drift into the path of the lower radiator fans. Maintenance and Care
: Regularly clean any aftermarket magnetic dust filters applied to the intake vents.