Realme C1 Rmx1811 Test Point Ae-tool !full! Jun 2026

Note: The first boot after a format can take up to 3–5 minutes as it rebuilds the cache system. Walk through the initial Android setup wizard without any security screens blocks. Safety Guidelines & Troubleshooting Tips

| Feature | Detail | |---------|--------| | Model | RMX1811 (also known as Realme C1) | | SoC | Qualcomm Snapdragon 450 (MSM8917) | | OS up to | Android 8.1 (Oreo), ColorOS 5.1 | | EDL Mode | Yes (via test point) | | Supported Tools | AE-Tool, UFI, Octoplus, MRT, Miracle Box |

The method remains one of the most powerful techniques for reviving a bricked or locked device. By physically shorting two hidden points on the motherboard, you force the phone into EDL mode, allowing AE-Tool to bypass FRP and screen locks at a partition level.

: The initial boot sequence after a full format or system flash can take up to 5 to 10 minutes as the operating system rebuilds its cache partitions. Realme C1 rmx1811 test point AE-Tool

For the AE-Tool to detect the device, you need to solder jumper wires to the following points on the motherboard: (Clock) CMD (Command) DATA0 (Data) VCCQ (Voltage) GND (Ground)

Need to unbrick or bypass the screen lock on your Realme C1? Here is the exact test point location for the RMX1811 to use with AE-Tool, Miracle Box, or any MTK tool.

Before you locate the procedure, gather the following: Note: The first boot after a format can

Click on the button to verify that the tool detects the active Qualcomm COM port.

Plastic guitar picks or spudgers to safely remove the phone's plastic back cover.

Check your computer's Device Manager. Under the section, you should see a new entry labeled: Qualcomm HS-USB QDLoader 9008 (COMxx) Unlocking and Flashing with AE-Tool By physically shorting two hidden points on the

AE-Tool (Advanced Evolution Tool) uses Qualcomm’s Sahara/Firehose protocol over EDL to:

This article provides a comprehensive, step-by-step guide on using the with AE-Tool . We will cover the necessary drivers, the exact location of the test point, the wiring/procedure, and how to execute the unlock or flash process.

: Carefully remove the back cover and the internal plastic shield covering the motherboard. Locating Test Points : The EDL test points for the Go to product viewer dialog for this item.