Flash Monotron 124 Manual • Real & Hot

Configurable for 1–20 cycles within a 24-hour period.

If you are shooting with a leaf shutter or an old analog system that requires precise delay compensation to catch the peak of the flash, turn the Delay Potentiometer to the required millisecond setting. For standard instant synchronization, keep the dial at zero. Section 4: Operational Workflows Manual Test Firing

key. The display will flash, indicating the override is active. Cancel Override:

Used for viewing, modifying, or deleting existing time steps. Maintenance and Troubleshooting flash monotron 124 manual

Press the button until the SING (Single-Shot) indicator lights up.

Readjust the "1-1430 min" settings. 6. Where to Find Replacement Parts Flash Monotron 124 Go to product viewer dialog for this item.

: Enters the programming matrix and cycles through pre-recorded routines ( P0cap P sub 0 P4cap P sub 4 Configurable for 1–20 cycles within a 24-hour period

This model is a daily-cycle timer, meaning it repeats its programmed schedule every 24 hours. It's part of a family of "Monotron" products from the manufacturer FLASH, which are used globally for professional system control.

Turn the to set a duration of 1.000 (one second). Press the knob to save. Connect your target device to the Pulse Out BNC port.

Features a lithium battery backup with a reserve of approximately 25,000 hours (over 3 years). Section 4: Operational Workflows Manual Test Firing key

Store the unit in a dry environment to prevent oxidation on the internal potentiometer tracks.

Note: This write-up is a generalized reconstruction. Always refer to the original manufacturer’s manual shipped with your specific Monotron 124 unit, as revisions exist for CE, FCC, or UL compliance.