If your computer is not recognizing the drives, it is rarely a driver issue and more often a power or configuration problem.
The safest way to find a better, functioning driver is to look up the hardware vendor instead of the generic model number. Connect the dock to your PC and turn it on. Open on Windows.
| Issue | Driver-Related Fix | Hardware/Setting Fix | |-------|-------------------|----------------------| | Only one bay detected | Update to JMS561 firmware v2.0.3+ | Clean SATA connectors; try a different HDD | | Slow 30-40 MB/s | Force UASP via registry | Use USB-C to USB-C cable (not USB-A adapter) | | Cloning stops at 99% | Driver lacks offline clone support – none needed | Use external power supply (12V/3A minimum) | | Drive spins down every minute | Edit Windows Power Plan: USB selective suspend = Disabled | Disable “Turn off hard disk after” |
Supports standard 2.5-inch and 3.5-inch SATA I/O/III hard drives and SSDs.
Connect the docking station directly to the motherboard ports on the back of your desktop PC rather than front-panel ports, which often lack sufficient power. all in 1 hdd docking model 875 driver download better
While the hard drive access is plug-and-play, the "One Touch Backup" (OTB) button requires specific software to function. PCClone EX Lite
Ensure you are plugged into a blue USB 3.0 port on your computer. Using a USB hub can sometimes reduce the power available to 3.5" drives, causing disconnection. 2. Use Proper Power Supply Always use the provided power adapter. The
Do not run the setup installer from inside a zipped folder. Right-click the downloaded folder and select . Step 2: Run as Administrator
| Chipset Found | Best Driver Source | Driver Type | | :--- | :--- | :--- | | | Station-Drivers.com or official JMicron firmware tool | Flashing firmware (driver) | | ASMedia ASM1153E | ASMedia official (via Windows Update Catalog) | .INF driver + firmware | | Initio INIC-3619 | Manufacturer’s support page (RND, etc.) | Custom INF | If your computer is not recognizing the drives,
If the device is not showing up in Windows Explorer, it is rarely a driver issue and usually related to hardware or disk management. Tom's Hardware Disk Management : Right-click the Start button and select Disk Management
Are you trying to get the , or are you trying to make the physical backup button work?
: Bare hard drives can get incredibly hot during long cloning sessions. Position a small desk fan to blow air across the exposed drives to prevent thermal throttling or drive failure.
What are you running? (Windows 10, Windows 11, macOS, etc.) Open on Windows
This comprehensive guide covers how to safely locate, download, and install the correct driver to maximize your device's performance. Understanding the Model 875 Hardware
If you can tell me the (e.g., Wavlink, generic) and which operating system you are using, I can help you locate the exact, direct download link for the best driver! Alternatively, I can: Tell you how to check which chipset your dock uses. Help you diagnose why your clone process is failing.
The PCClone EX Lite software, which enables the backup button, is often included on a mini-CD in the box or hosted on third-party driver sites like Driver Scape .
Before diving into driver downloads, it’s crucial to understand what this device is. The "All in 1 HDD Docking Station Model 875" (also referred to as the "875D" model) is a legacy device that acts as a bridge between your computer and older hard drives. It's designed to accept both 2.5-inch and 3.5-inch hard disk drives (HDDs), supporting capacities up to 2 TB. This makes it an invaluable tool for data recovery, accessing old drives, or performing drive cloning. It also often includes a multi-card reader.
Ensure the external power brick is plugged directly into a wall outlet, not a weak power strip. 3.5-inch mechanical drives require significant power to spin up.
Go to the tab and select Hardware IDs from the dropdown.