Niton Xlt 898 User Manual _hot_ 〈iOS RECOMMENDED〉
Follow this sequence every morning or at the start of every new shift. Initialization Sequence
Handheld X-ray fluorescence (XRF) analyzers have revolutionized elemental analysis across multiple industries, including scrap metal recycling, environmental testing, and manufacturing quality control. Among the legacy workhorses of this technology is the Thermo Scientific Niton XLt 898.
Designed for quickly sorting large volumes of mixed materials, this mode allows you to pre-store up to 500 signatures. The instrument can then match an unknown sample in as little as 1-2 seconds . Niton Xlt 898 User Manual
| Specification | Detail | | :--- | :--- | | | Energy Dispersive X-ray Fluorescence (EDXRF) | | Excitation Source | Low-power 35kV/1.0W X-ray tube with Silver (Ag) target | | Detector | High-resolution, Peltier-cooled Si-PIN Diode | | Elements Range | Titanium (Ti, 22) through Bismuth (Bi, 83) | | Weight | Approx. 1.4 kg (3.0 lbs) | | Dimensions | 248mm × 273mm × 95mm (9.75" x 10.5" x 3.75") | | Display | Backlit VGA touchscreen LCD | | Data Storage | Up to 3,000 readings including X-ray spectra | | Battery Life | Hot-swappable Li-Ion battery packs; approx. 6-12 hours of continuous use depending on the testing mode | | Operating Temp. | -20°C to 49°C (-7°C to 49°C for standard operation, -20°C to 50°C for extended use) |
Refer to the troubleshooting guide in Appendix A for assistance with common issues, such as: Follow this sequence every morning or at the
Clean the gold-plated contact pins on both the battery pack and the inside of the handle with isopropyl alcohol if the unit experiences intermittent power loss. 5. Troubleshooting Common Error Codes and Issues
Do not look into the window. Turn off power, remove the battery, re-insert, and restart. Calibration drift or software freeze. Designed for quickly sorting large volumes of mixed
Request a guide on how to configure custom for specific alloy grades within the NDT software.
Miniature X-ray tube (typically 40 kV max, variable current).
Slide a fully charged Lithium-Ion battery pack into the base of the handle until it clicks securely into place. Press and hold the power button on the rear control panel for approximately three seconds. Step 2: User Login and Security Verification
Flush the nose cone completely flat against the metal surface to prevent X-ray leakage. Pull and hold the trigger. For standard alloys, a 5 to 10-second burn is sufficient for accurate grade identification. Mining and Soil Environmental Modes