Xmtk-9000 User Manual Jun 2026

After update, verify calibration constants – some updates reset user parameters but retain factory trim.

Access the advanced configuration menu to fine-tune the controller for your specific application.

Includes self-diagnosis and "intelligent" functions that simplify operation for factory staff.

For testing and calibration, users can manually force output behaviors: xmtk-9000 user manual

| Task | Key Sequence | |------|---------------| | Change setpoint | Press ▲ or ▼ directly | | Enter configuration | Hold ENT 3 sec | | Start Auto-tune | Config > Control > AT = ON | | Silence buzzer | Press any key | | View max/min PV | Press ◀ + ▼ together | | Reset max/min | Hold ENT while viewing max/min | | Factory reset | Config > System > Reset > YES |

Increments or decrements active numerical parameters.

Do not mount the XMTK-9000 directly above high-voltage contactors or VFDs. Electromagnetic interference will corrupt thermocouple readings. After update, verify calibration constants – some updates

Supports standard TC (Thermocouple) and RTD (PT100/CU50) signals. Output Control:

If the device begins to hum in a key lower than B-flat, evacuate the floor immediately.0;25c;

The controller will flash an output indicator, and the PV will fluctuate while tuning. Do not turn off power until the tuning is complete. 5. Troubleshooting Common Issues For testing and calibration, users can manually force

Access the web console and navigate to . Click Browse and select the downloaded file. Select Execute Flash Sequence .

If Static, input your dedicated network credentials using the on-screen keypad.

Internal components are not user-serviceable. Opening the housing voids the manufacturer's warranty. Hardware Overview and Installation

Ensure your PC is configured to the same subnet (e.g., IP: 192.168.1.50 , Subnet: 255.255.255.0 ). Open a modern web browser and input https://192.168.1.100 . Enter the default administrative credentials: admin Password: password9000

4 channels (0-10V, 4-20mA software selectable)