Zu Content springen
Deutsch
  • Es gibt keine Vorschläge, da das Suchfeld leer ist.
  1. Help Center
  2. peugeot 2008 sos battery replacement
  3. peugeot 2008 sos battery replacement

Peugeot 2008 Sos Battery Replacement 2021 Jun 2026

Use your trim tools to carefully remove the plastic housing near the rear-view mirror or the passenger-side roof trim, depending on your specific year of 2008.

Carefully remove the trim panels (often the overhead console or dash display trim) using plastic pry tools to avoid damaging clips.

The first sign of a dying backup battery is usually a change in the behavior of the SOS button's indicator lamp:

The LED on or near the roof console SOS button flashes orange or red for a few minutes after starting the vehicle. peugeot 2008 sos battery replacement

: These small lithium or NiMH batteries generally last between 4 to 6 years.

Often indicates a complete failure of the internal battery, requiring immediate replacement. Where is the SOS Battery Located?

Secure the new battery, ensuring the connector is firmly in place. Use your trim tools to carefully remove the

SOS battery (also known as the "emergency call" or "backup" battery) in a Peugeot 2008

Reinstall the glovebox or dashboard trim panels in the reverse order of removal.

If you'd like to find the for your specific model year or need help locating a local specialist to handle the coding, just let me know! AI responses may include mistakes. Learn more : These small lithium or NiMH batteries generally

The car may need to be driven for a few cycles, or a few days, for the system to detect that the new battery is charging, which clears the fault.

Plastic trim removal tools (to avoid damaging interior trim). Replacement Procedure

Note: These steps are intentionally general because exact disassembly varies by year and trim. If your model’s SOS battery is non-replaceable, the telematics unit must be replaced as an assembly.

Unclip the fragile wire wiring harness connector from the circuit board. Do not pull directly on the wires; use a small flathead screwdriver to release the connector clip. Step 4: Install the New Battery

: Remove the relevant trim panels (either the lower dash or the overhead console) carefully to avoid breaking plastic clips.