Actia — Psa Xs Evolution 9780z5 Driver [updated]

Direct the search path to your Diagbox installation directory (typically C:\AWRoot\bin\fi\ or C:\APPLIC\LIMA\ ).

The 9780.Z5 reference signifies the original hardware layout manufactured by Actia. Modern clones often use this same identifier. Revision B vs. Revision C

I can provide the exact step-by-step configuration for your specific diagnostic setup. Share public link

If you have lost the original disc, you can often find the driver in third‑party repositories or through dedicated automotive forums. Some generic Actia USB driver packages also exist (e.g., “Windows Driver Package – ACTIA Automotive ACTIA USB Devices Driver Installation Media”) which support Windows XP, Vista and 7.

Older software (Lexia 3 / PP2000) relies on older 32-bit USB drivers. actia psa xs evolution 9780z5 driver

A: Yes – the driver is always included on the DiagBox installation disc. You can also find it on various automotive file‑sharing sites, but always scan downloaded files for malware.

If the device is not recognized, drivers can often be found within the installation directory of DiagBox (usually under C:\AWRoot\bin\launcher\ Installation Procedure Support - ACTIA IME

Connect the USB cable to your PC (prefer a , as USB 3.0 ports can cause timing synchronization issues). Connect the other end to the Actia XS Evolution pod.

The autorun menu popped up. He bypassed the main Diagbox software installation—he didn't need the updates; he needed the bridge. He navigated to the Drivers folder. It was a mess of .sys and .inf files. Direct the search path to your Diagbox installation

Always plug the 9780.Z5 directly into the motherboard USB ports.

Navigate to > Advanced options > Startup Settings > Restart .

Connect the XS Evolution interface to a USB 2.0 port. Windows should display a notification: "Setting up a device" followed by "Device is ready." Method 2: Manual Installation via Windows Device Manager

Under the ACTIA USB Devices dropdown, you should see "USB Com Board Driver (Multi-instance)" . Revision B vs

Even advanced users face hurdles. Here is a troubleshooting matrix specific to problems.

Once the driver is correctly installed, the device appears in Windows Device Manager under one of two names:

If the driver is active, the tool will display your current serial number and firmware version (e.g., Reference: , Version: 4.3.7 ). Firmware Downgrading and Upgrading Diagbox 7.xx to 9.xx: Requires firmware 4.3.2 or higher.