Hamachi Relayed Tunnel To Direct Tunnel Fix __top__

Add the following line (choose any available UDP port):

If your router's NAT configuration is too strict, Hamachi cannot establish a direct Peer-to-Peer (P2P) connection. Enabling UPnP or setting up manual port forwarding resolves this router-level blockage. Option A: Enable UPnP (Easiest Method)

A "Direct Tunnel" is the goal. It establishes a peer-to-peer (P2P) connection between computers for the fastest possible speeds and lowest latency. hamachi relayed tunnel to direct tunnel fix

Create a new Value:

A direct tunnel, on the other hand, is a connection method that establishes a direct and encrypted connection between two devices. When a device connects to a Hamachi network using a direct tunnel, it establishes a direct connection to the destination device, without the need for a relay server. Direct tunnels are generally faster and more efficient than relayed tunnels but require specific network configurations to work. Add the following line (choose any available UDP

As one user succinctly put it: “The main cause of relayed tunnel is lack of UPnP (or port forwarding) in the routers so that a direct tunnel cannot be established between two computers.”

The following steps cover the most common fixes to achieve a Direct Tunnel (green dot): 1. Allow Hamachi Through Windows Firewall Direct tunnels are generally faster and more efficient

Run hamachi list to see your network.

If the basic resets don't work, it's time to configure your network. For a direct tunnel to work reliably, especially for hosting a game server, you must force Hamachi to use a dedicated, static port and then forward that port in your router's settings.

If you are permanently stuck on Relay, consider switching to or Tailscale . Both handle NAT traversal better and rarely fall back to relayed connections unless absolutely necessary. They are free for small teams.

The most common cause of a relayed tunnel is the Windows Firewall blocking the Hamachi Tunneling Engine.