Zpao Electric Bike Manual ~repack~ Page

To access the background settings menu (often called P-settings), turn on the display, then for a few seconds. Use the (+) and (-) buttons to change values, and the Power button to switch between program codes.

Rotate the steering column so it faces forward.

Remove the battery, clean the terminals, and slide it back in until it clicks. Main wiring harness is loose. Zpao Electric Bike Manual

Lift the e-bike frame and all accessories out of the carton.

Typically takes 4–6 hours for a full charge. To access the background settings menu (often called

Lubricate the chain with bicycle-specific chain lubricant. Wipe away any excess oil to prevent dirt buildup.

If your Zpao LCD screen displays an error code, it indicates an issue within the electrical loop. Here are common error codes found on Zpao and similar e-bike controller systems: Error Code Battery Under-Voltage Remove the battery, clean the terminals, and slide

This article serves as a comprehensive guide for the , covering essential operation, maintenance, and troubleshooting tips for Zpao e-bike owners.

Check the sidewall of your tires for the recommended PSI (usually between 30–50 PSI for fat tires or 50–65 PSI for commuter tires). Inflate both tires to the correct pressure. 2. Battery Management and Charging

Note that on most smart e-bike systems, if your battery falls to or below 5%, the motor will automatically shut off to protect the battery cells, leaving you to pedal manually. ⚠️ Section 4: Safety Warnings and Maintenance

If your ZPAO model is a folding e-bike, ensure all central folding hinges and frame latches are securely locked before sitting on the bike.