The MS-7613 supports first-generation Intel Core processors. It is important to note that this board support Sandy Bridge (LGA1155) or newer chips. Compatible CPUs include: Intel Core i7 (8xx series) Intel Core i5 (7xx and 6xx series) Intel Core i3 (5xx series) Intel Pentium (G6950) 3. Front Panel Header Pinout
Comprehensive Hardware Reference: MS-7613 Ver 1.1 Motherboard Manual
The Intel H57 chipset cannot read modern memory chips. When buying 4GB DDR3 sticks for this motherboard, you must source low-density RAM (2R×8) . This means the RAM stick must have 16 physical memory chips on it (8 chips on each side of the module). Sticks containing only 4 or 8 total chips (high-density) will fail to post or trigger blue screens (BSOD) during OS installation. 4. Motherboard Layout & Internal Headers
Designed for dedicated graphics cards. Ensure your case power supply can support the wattage requirement of your graphics card, as the motherboard can only safely deliver up to 75W through this slot. ms-7613 ver 1.1 motherboard manual
For further assistance and support, you can visit the following resources:
The board is built around the Intel H57 Express chipset and adheres to a standard micro-ATX form factor (24.4 cm x 24.4 cm).
If you are looking for specific drivers, using the model number of your computer. Do you have a specific problem with the motherboard, or are you looking to upgrade a specific component? Share public link The MS-7613 supports first-generation Intel Core processors
Connect the HDD LED wire. Pin 1 is Positive (+), Pin 3 is Negative (-).
Find the 3-pin jumper configurations located near the SATA ports or battery, labeled and CLR_PWD . To Clear CMOS (Reset BIOS Settings): Turn off the PC and unplug the power cable from the wall.
Manual answer: Yes – press F11 at POST for Boot Menu. Must set “USB Legacy Support” to Enabled. Sticks containing only 4 or 8 total chips
This guide provides a detailed overview of the specifications, layout, jumper settings, and upgrade capabilities often sought in the MS-7613 ver 1.1 motherboard manual. 1. Technical Specifications Overview
The MS-7613 Ver 1.1 relies on the chipset to support first-generation Intel architecture. Component / Feature Specification Manufacturer Name MSI MS-7613 HP / Compaq Name Form Factor Micro-ATX: CPU Socket LGA 1156 (Socket H) Chipset Intel H57 Express PCH Memory Slots 4 × 240-pin DDR3 DIMM Maximum Memory 16 GB Dual-Channel DDR3 Expansion Slots 1 × PCIe x16, 3 × PCIe x1 Storage Connectors 4 × SATA II (3.0 Gbps) Audio Chipset Realtek ALC888S 8-Channel HD Audio Network Interface Realtek RTL811DL Gigabit Ethernet (10/100/1000 Mbps) 🔲 Processor Upgrade Information
The (also known as the HP Iona-GL8E ) is a Micro-ATX motherboard designed by MSI specifically for HP and Compaq desktop PCs. Primarily featured in Pavillion and TouchSmart systems from around 2010, this board is built on the Intel H57 Express chipset to support LGA 1156 processors, including the first-generation Intel Core i3, i5, and i7 processors.
supports first-generation Intel Core processors. It is important to note that because this is an OEM board, BIOS support is limited compared to retail MSI boards. Intel Core i7-8xx (Lynnfield) Intel Core i5-7xx (Lynnfield) Intel Core i5-6xx (Clarkdale) Intel Core i3-5xx (Clarkdale) Bus Speed: DMI (Direct Media Interface)