Dvb01 User Manual Jun 2026

Connect your electronics/load through the relay. If your battery drops too low, the DVB01 disconnects the load to protect the battery from permanent depletion damage.

The DVB01 offers five preset functions, selected via the P-0 parameter. The table below summarizes their operating principles:

| Specification | Details | |--------------------|-------------------------------------------------------------------------| | Measurement Range | DC 0V – 99.9V (up to 100V) | | Measurement Accuracy| ≤ 0.1V | | Operating Voltage | DC 5V / 12V / 24V (must not exceed nominal voltage by >10%)| | Operating Current | <90mA (at 5V) – 12mA (relay inactive) – <3mA (display off) | | Functions | Five preset functions (F-01 to F-05) | | Memory | Automatic parameter saving; settings are not lost when power is off | | Power Saving Mode | User-configurable automatic power saving |

Short press one final time. The display will stop flashing, save all parameters to internal memory, and return to real-time monitoring. Step 3: Display Power-Saving Mode

The DVB01 utilizes three buttons for setup: , [+] , and [-1] . General Setup Sequence Enter Menu: Press [SET] shortly to display P0-P5. Select Function (P0): In P0, use to select function F1 through F5. Adjust Thresholds (P1-P4): P1 (Upper Limit/Voltage 1): Sets the first voltage limit. P2 (Lower Limit/Voltage 2): Sets the second voltage limit. P3 (Mode): Sets delay or behavior. P4 (Power Save): 00 = Off, 01 = On. Exit/Save: Long press [SET] to save and exit. 5. Function Details (F1 - F5) dvb01 user manual

The DVB01 is a versatile and user-friendly DVB receiver that provides access to a wide range of digital TV channels and radio stations. The device's user manual provides detailed information on its features and operation, making it easy for users to get started. With its advanced features, such as EPG, timer recording, and timeshifting, the DVB01 is an ideal solution for individuals who want to enjoy their favorite TV shows and radio programs without the need for a traditional TV subscription.

After configuring your parameters, one final time. This saves all settings and exits back to Operational Mode , where the relay will start operating according to your new configuration.

Relay is engaged when the voltage is outside the range P₁-to-P₂. 4. Programming the DVB01

The DVB01 comes with a range of advanced features, including: Connect your electronics/load through the relay

Available in 5V, 12V, or 24V versions (fixed per model). Measurement Range: 0V to 100V DC with an accuracy of ±0.1Vplus or minus 0.1 cap V

Hold [SET] while powering on the module to restore factory defaults. Key Takeaways

The is a multi-function voltage monitoring relay (voltage comparator) designed to monitor DC voltages and trigger a relay output based on set thresholds. Technical Specifications

This article serves as a comprehensive guide, walking you through the , wiring, programming functions, and troubleshooting steps based on standard DVB01 documentation . 1. Product Specifications and Features The table below summarizes their operating principles: |

Ensure you are short-pressing the SET button all the way through the cycle (V1 -> V2 -> T1 -> Save) until the display returns to normal. Powering off mid-configuration cancels changes.

Relay activates when voltage is above the upper limit and deactivates when it drops below the lower limit. F-04 (Window Mode - In): Relay activates only when the voltage is the upper and lower limits. F-05 (Window Mode - Out): Relay activates when the voltage is either the lower limit or the upper limit. 3. Programming Parameters The device uses four keys: Description Adjustable Range Function Selection F-01 to F-05 Threshold 1 (V1) 00.0V to 99.9V Threshold 2 (V2) 00.0V to 99.9V Voltage Calibration Flashing display for manual correction Pull-in Delay (T1) 0.0s to 99.9s Disconnect Delay (T2) 0.0s to 99.9s 4. How to Program Enter Setting Mode: Long press until "P-0" appears. Select Parameter: Short press to cycle through P-0 to P-5. Adjust Value: Short press to view the current value (digits will flash). Use to switch digits and to change the number. Save & Exit: After adjusting, short press to return to the parameter list. Long press to save all settings and return to normal operation. Class B Forums Voltage Relay Module (DVB01) User Manual - Class B Forums

If the device’s on-screen menu looks different from what we described, your DVB01 may be a receiver (set-top box) rather than a modulator. For a receiver manual, search "DVB01 set-top box user manual".