Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 __link__
The wizard interface will refresh, and your configured logical disk array will appear in the volume box. Select the unallocated space partition and click to continue the standard operating system installation path. Alternative Deployment: Using HPE Intelligent Provisioning
Right-click and select Update driver .
BIOS SATA controller mode mismatch. Solution: Reboot into System BIOS (F9). Navigate to System Options → SATA Controller Options → Ensure Embedded SATA Configuration is set to "Dynamic Smart Array" or "RAID Mode" . Do NOT use AHCI or Legacy.
Understanding this comparison helps you decide whether troubleshooting the S100i driver is worth the effort, or if a hardware RAID upgrade is justified.
Requires the server system ROM to be configured in UEFI Boot Mode; legacy boot options are unsupported for this controller. Downloading the Official Driver The wizard interface will refresh, and your configured
The download is typically an .exe file (e.g., cp052316.exe ). Crucial Step: You must run this file on a separate PC and select the Extract option to get the actual .inf and .sys driver files. Step-by-Step Installation Guide 1. Enable SW RAID in BIOS
The S100i firmware is embedded in the server’s System ROM. Always install the latest HPE SPP (Service Pack for ProLiant) to update the ROM, which often includes S100i RAID bug fixes.
Ensure "SATA Controller Options" in UEFI is set to RAID mode, not AHCI.
Insert the USB drive containing the extracted driver files. Click "Load Driver": Click the Load Driver button. Browse: BIOS SATA controller mode mismatch
Deploying Windows Server 2022 on Hewlett Packard Enterprise (HPE) Gen10 servers requires a clear understanding of your storage architecture. One of the most common storage controllers found in entry-level HPE ProLiant setups is the HPE Smart Array S100i SR Gen10 Software RAID.
ssacli controller all show
Method 1: Manual Load via USB (Recommended for Clean Installs)
The downloaded file is an HPE Smart Component ( .exe ). Do not just copy this file to your installation media. Run the .exe file on a working Windows computer. Select the option rather than Install. Choose a folder destination (e.g., C:\HPE_S100i_Driver ). Do NOT use AHCI or Legacy
Always download the latest driver from HPE Support (search for your specific server model) to ensure compatibility and stability with Windows Server 2022 updates and HPE management tools.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The HPE Smart Array S100i SR Gen10 is a software RAID controller embedded within HPE ProLiant Gen10 servers, offering an cost-effective solution for data redundancy without needing a dedicated hardware controller. When deploying Windows Server 2022 on these servers, ensuring the latest driver is installed is crucial for system stability and performance.