Nalco 77225 Safety Data Sheet 2021 Jun 2026

In case of contact, rinse skin/eyes immediately with water for 15 minutes, removing contact lenses if necessary . If swallowed, do not induce vomiting and seek immediate medical attention . Inhalation requires moving to fresh air .

: Refer to Section 12 of the SDS for environmental and aquatic toxicity data to ensure responsible disposal and spill management. Summary Table: Quick Reference Key Takeaway Section 2 Hazard Identification Corrosive, causes severe burns. Section 4 Rinse immediately; call a poison center for ingestion. Section 8 Exposure Controls Use chemical-resistant PPE at all times. Section 9 Physical Properties High pH (alkaline).

When opening containers, connecting feed pumps, or collecting boiler water samples, personnel must wear the following gear:

The is a vital hazard communication document used to ensure the safe handling, storage, and disposal of Nalco 77225, a specialized internal boiler feedwater treatment. Manufactured by Nalco Water, an Ecolab company, this liquid product prevents scale accumulation and adherent deposits in boilers operating at pressures up to 40 barg. It achieves this by combining a phosphate residual program with Transport Plus polymer technology. Because Nalco 77225 is highly alkaline, mastering its 2021 GHS-aligned SDS is critical for workplace safety. nalco 77225 safety data sheet 2021

: Immediately strip away all contaminated clothing and shoes. Flush skin under a safety shower with copious amounts of water. Wash clothing thoroughly before attempting reuse.

Workers must wear chemical splash goggles, a full-face shield, protective boots, and heavy-duty chemical-resistant gloves and clothing. Accidental Release & Spill Clean-Up

Understanding the baseline physical parameters helps facility teams diagnose leaks, verify appropriate pump configurations, and safely manage product storage. Value / Description Clear, colorless liquid Odour Distinctly ammoniacal pH (100%) 13.5 (Highly alkaline) Freezing Point -19.9 °C (-4 °F) Relative Density 1.46 – 1.50 at 25 °C Solubility Completely soluble in water Viscosity (Dynamic) 8 – 16 mPa.s at 25 °C Flammability Non-flammable; does not flash Material Compatibility and Engineering Controls In case of contact, rinse skin/eyes immediately with

The GHS framework assigns specific hazard classifications, signal words, and precautionary statements to ensure high-visibility risk communication. GHS Classification & Signal Word : Danger

; exceeding this for long periods can lead to the formation of a white precipitate. Emergency Response and Environmental Impact

Nalco 77225 is formulated as an internal boiler treatment utilizing a combination of phosphate residuals and Transport Plus polymer technology : Refer to Section 12 of the SDS

: Avoid all contact with eyes, skin, or clothing. The product should be used only with adequate ventilation to prevent the inhalation of mists or vapors. : Nalco 77225 should be stored in corrosive-resistant containers

An SDS is a document that provides critical information about the safe handling, use, storage, and disposal of a chemical product. It's a crucial resource for ensuring the health and safety of workers, as well as preventing environmental harm. The SDS for NALCO 77225 is designed to provide users with the necessary information to handle the product safely and responsibly.

: Splash-proof safety chemical goggles. A full-face shield is recommended if splashing is a risk.

with a resistant inner liner. The maximum storage temperature is 65°C (149°F)