If you encounter any issues during installation or configuration, here are some troubleshooting tips:
, and manually update the driver by pointing it to the "Drivers" folder within your C: drive installation. Bimmerpost Phase 4: The Final Handshake With the hardware plugged in, you launch XprogDesktop.exe . Often, the first launch requires a firmware update. XPROG-box - ELDB electronics store
Confirm that Windows Defender did not secretly delete the AdbeRdr components or the patch file.
Verify that the device is now properly recognized under the section. Take note of the assigned COM port number (e.g., COM3). Configuring Software Compatibility how to install xprog 5.55 on windows 10
Your computer will restart in a mode that allows unsigned driver installation.
Repeat Phase 1, ensuring you actually hit F7, and restart.
Ensure your USB cable is short and plugged directly into a motherboard port (avoid USB hubs). If you encounter any issues during installation or
Extract your downloaded XPROG 5.55 software package into this folder.
| Error | Solution | |-------|----------| | “USB device not recognized” | Reinstall drivers manually (Step 3). Try a different USB 2.0 port (avoid USB 3.0 blue ports if possible). | | “Driver is not intended for this platform” | You skipped Driver Signature Enforcement on 64-bit. Reboot and disable it (Step 2). | | Xprog opens but hangs on “Connecting” | Relaunch as Administrator. Disable antivirus. Check cable quality. | | “Cannot load hidapi.dll” | Copy the crack’s hidapi.dll into the same folder as Xprog.exe . | | Windows deletes Xprog.exe instantly | Restore from Windows Defender quarantine; add folder to exclusions. |
Now you can link your physical XPROG-M hardware to your Windows 10 system. XPROG-box - ELDB electronics store Confirm that Windows
This setting resets after a shutdown. For a permanent fix, run CMD as Admin and execute: bcdedit.exe /set nointegritychecks on (To revert: bcdedit.exe /set nointegritychecks off )
(to prevent Windows from overwriting our custom drivers):
Your computer will reboot into the blue menu screen.
: Windows 10 requires signed drivers by default. To install the XPROG drivers, you must disable this check via Settings > Update & Security > Recovery > Advanced Startup Installation Steps Copy Software Files